Cutter Set 1 (8mm shanks 6pcs)
A specially chosen range of cutters for dovetailing, morticing and tenoning on the WoodRat. It's the perfect way to get started using a 1/4" or 8mm router. Includes: 8-7-12-6: Dovetail bit, for small drawers and boxes, 8-7-16-8: Dovetail bit, for boxes and large drawers, 8-7-24-12: Dovetail bit, for chests and boxes, 8-S-42-8: 8mm Straight bit for mortising, 8-S-42-10: 10mm Straight bit for deep mortises and small dovetails, 8-S-42-12.7: Straight bit for tenons and dovetail pins.
Cutter Set 2 (8mm and 1/2" shanks 9pcs)
A specially chosen range of cutters for dovetailing, morticing and tenoning on the WoodRat or LittleRat. It's the perfect way to get started using a 1/2" router. This set also contains extra-long conversion sleeves for use with the supplied 8mm cutters and your own 1/4" cutters. Note: The WR-H-6-27-15 cutter cannot be used for making through dovetails on the LittleRat. It is, however, excellent for making sliding dovetails. Includes: 8-7-12-6: Dovetail bit, for small drawers and boxes, 8-7-16-8: Dovetail bit, for boxes and large drawers, 8-7-24-12: Dovetail bit, for chests and boxes. H-6-27-15; Half-inch dovetail cutter, ideal for sliding dovetails. 8-S-42-8: 8mm Straight bit for mortising, H-S-50-10: 10mm Straight bit for deep mortises and small dovetails, H-S-50-H Straight bit for tenons and dovetail pins.
Classic Drawer-Front Dovetail Set 4pcs
Unique to WoodRat, these 1-in-9 slope, classic drawer-front dovetail cutters are the finest available anywhere. Create those fine pins that are the hallmark of the very best cabinetwork. Note: These cutters are sold in pairs in recognition that they will eventually break. Includes: 2x WR-8-9-18-6.5, 2x WR-8-9-13-4.7
Fill-in Set: 4 pcs (Now includes new WR-8-7-10-5)
The Fill-in Set transforms Set 1 or 2 into a finely graded dovetail cutter collection. Now you'll always have the perfect cutter to match your wood thickness, even down to 8mm! Includes: WR-8-7-14.7, WR-8-7-20-10, WR-8-7-10-5 as well as the smallest WoodRat dovetail cutter, WR-8-7-8-4.